The cable machine manufacturer teaches you how to maintain the cable machine

The daily maintenance of the arranging machine is very important. We can't let the machine keep working to keep up with work. Both humans and machines have a certain load range. The life of the machine is interrupted. The daily maintenance work of the automatic terminal has been completed, which can extend its service life and improve work efficiency. Let the arranging machine manufacturer introduce the daily maintenance and repair of the automatic cable terminal machine. Color bar machine

1. The clamping must be accurate and firm. The mold gap is reasonable, and the edges of the mold are often kept sharp.

2. It is forbidden to overload the machine. The stamping pressure of the workpiece to be processed shall not exceed the limit range.

3. Before turning on the motor, the clutch must be disconnected first, and then the flywheel is placed in the idling position.

4. Lubricate all parts of the machine and friction parts, pay attention to refueling, no less than 2 times per shift.

5. Frequently check whether all parts of the machine are working properly, and whether all couplings and fasteners are loose. If it is loose, please tighten it in time. If the organic parts are found to be worn, they must be replaced in time.

6. Machines and electrical equipment must always be kept clean, dry and leak-free. In the course of work, if faults and abnormal phenomena are found, they must be stopped immediately for inspection and maintenance. It is forbidden to deal with diseases, so as not to cause greater losses due to the stuck mechanical parts or the burning of the motor.

7. Fully automatic terminals should be inspected and maintained regularly.

Attention should be paid to the use of the terminal:

1. During operation, if the machine is abnormal, please turn off the power first, and ask the mechanic to perform maintenance and debugging in time.

2. When replacing the terminal, the power supply must be disconnected before the replacement operation. It is strictly forbidden to replace it while the machine is running.

3. During operation, the power of the machine is not disconnected. Do not use your fingers or any part of your body to enter the punching area to avoid accidents.

4. During the operation, if you need to leave the work, you must turn off the power to leave.

5. During the operation, if any terminal is stuck in the die, it must be removed with scissors or striker before proceeding.

6. Without permission, it is strictly prohibited for non-designated personnel to debug or disassemble the machine parts.

Shenzhen Tianheng Machinery Co., Ltd. is a Christmas craft gift machine, madder machine, rain silk machine, pine needle machine, automatic leaf drawing machine, loosening machine, glue spreading machine, optical fiber peeling machine, color striping machine, wire arranging machine, rosin The company is headquartered in Longgang District, Shenzhen, and has a complete and scientific quality management system. It is a self-employed professional production and processing of products such as barrel crushers and slitting machine manufacturers. The integrity, strength and product quality of Shenzhen Tianheng Machinery Co., Ltd. have been recognized by the industry. Welcome friends from all walks of life to visit Shenzhen Tianheng Machinery Co., Ltd. for guidance and business negotiation.