Common faults of arranging machine and analysis and solutions of common faults
As a key machine and equipment for wire harness processing in power companies and household appliances, the wire arranging machine has a variety of functions such as feeding, wire breakage, wire stripping and end pressing. Once common faults occur, it will seriously hinder manufacturing. In this article, we will introduce the automatic wire-arranging machine in detail, what common faults are often encountered in the whole process of application, and the analysis and solutions of common faults.
Inconsistent length of electronic wire disconnection
a. It may be that the wire feeding wheel is pressed too tightly or too loosely; adjust the straightener to have the straightening function and be able to send out successfully as the standard.
b. Broken wire wound or wound blade; dismantle and replace with a new cutting knife.
The skinned mouth varies in length
a. The wire feed wheel is pressed too tightly or loosely; adjust the gap between the two wheels with the wire roller adjusting part so that the cable does not squeeze and run too loose.
b. The cutting and stripping knife should be lighter or too deep; use the cutting knife to adjust the intensity of the wound to the appropriate part, and the standard is that the copper wire can not be damaged and the rubber can be successfully dropped.
c. Damaged or cut blade of the cutting and stripping knife; replace the cutting head with a new one.
The device cannot be started or terminated during operation
a. Check whether there is a current input (380V) and 6KG standard air pressure.
b. Check whether the total number of settings has arrived, if it has arrived, set it again and then turn off the power and restart.
c. Check whether there is a cable or a certain operating position stuck.
d. Check whether the terminal machine is connected to the data signal or the switching power supply, which causes the terminal machine to not be crimped.
Uneven copper wire exposed when crimping the terminal
a. Check whether the gun-shaped lower arm hose is attached to the cable.
b. Check whether the wound of the terminal machine is straight relative to the hose of the lower swing arm.
c. Check if the auxiliary steel cutting of the terminal machine is loose.
d. Check whether the distance between the terminal machine and the automatic machine has changed.
The terminal machine is very noisy
a. A certain part or component of the terminal machine is damaged, causing friction to expand.
b. The screw loosened during the working of the terminal machine, causing the vibration of the parts to increase.
The motor of the terminal machine does not rotate
Check whether the clutch position of the terminal machine is correct, and whether the fuse has been burned.
Shenzhen Tianheng Machinery Co., Ltd. is a Christmas craft gift machine, madder machine, rain silk machine, pine needle machine, automatic drawing machine, drawing machine, glue spreading machine, optical fiber peeling machine, color striping machine, wire arranging machine, rosin The company is headquartered in Longgang District, Shenzhen, and has a complete and scientific quality management system. It is a self-employed professional production and processing of products such as barrel crushers and slitting machine manufacturers. The integrity, strength and product quality of Shenzhen Tianheng Machinery Co., Ltd. have been recognized by the industry. Welcome friends from all walks of life to visit Shenzhen Tianheng Machinery Co., Ltd. for guidance and business negotiation.
tel