The main parameters that must be set for the arranging machine

Because the production process of the transformer determines the frequent starting of machinery and equipment and the constant torque regulation, the main parameters that must be set for the general transformer winding machine are:

Slow action setting is also a common main parameter. It mainly controls the slow operation of the control system when starting and parking. It has the function of gentle development and parking buffer. Proper settings can allow actual operators to have a resistance when starting the winding machine. The whole process of pulling force, when the machine and equipment are parked, having a buffer can make the parking more accurate.

The number of turns setting is the number of turns that the machine and equipment must operate according to the production process. It is divided into the total number of turns and the number of turns that match each step sequence. The setting should pay attention to the total number of turns equal to the total number of turns of each step sequence. .

The operating speed of the wire arranging machine manufacturer is used to control the speed ratio during the operation of the system. The setting of the speed ratio must be integrated with the production process and the specific working conditions of the winding. Too fast and slow are not harmful to the formation of the electromagnetic coil, and rapid operation will be disadvantageous. The actual operation of the staff increases the vibration and noise of the machinery and equipment, and the excessively low-speed operation will endanger the production capacity of the machinery and equipment and give full play to the high efficiency, and will also harm the torque output of the spindle bearings of the machinery and equipment.

With the development of science and technology, in general, there are no strict regulations on the application of automatic winding machines in the natural environment. Even if you say that, because automatic winding machines contain many electronic components, they are most afraid of direct sunlight and dampness and cold. Smoke, dust, vibration, etc., can cause erosion of electronic components, or cause short-circuit failures between components, causing abnormal operation of the winding machine. Generally, attention should be paid when installing equipment.

For the user, it is mainly to pay attention to the maintenance of the surrounding environment. For example, it is necessary to pay attention to not having to send the folding umbrella to the manufacturing site on rainy days to maintain the manufacturing site clean and tidy. The layer-by-layer sequence function is used to control the order of the system operation. It is generally based on the production process to make decisions. The forming and winding of an electromagnetic coil is not only the winding of the silk-covered wire, but also many other processes such as paper wrapping and wrapping insulation. These are arranged in layers, so the appropriate setting of the role of the layer by layer will give full play to the high efficiency of the machinery and equipment.