The frame of the slitting machine

The slitting machine is composed of a frame, a transmission system, a receiving and discharging machine, a tension control device, a traction member, a slitting bracket, a waste winding and a discharging device. The transmission of the paper slitting machine is driven by the main motor to drive the rubber roller and the receiving shaft to operate synchronously to achieve the purpose of stretching and discharging the finished product. Let us take a closer look:

1. Receiving mechanism and tensioning device: The receiving mechanism of the paper slitting machine is mainly composed of a chain, a synchronous wheel, a magnetic powder clutch and an air expansion shaft. As long as the adjustment is made, the two reels are controlled by one motor. The current of the magnetic powder clutch can change the tension of the receiving shaft.

2. Traction component: The traction component of the paper slitter is mainly composed of a pair of traction rubber rollers and multiple hard alumina rollers, which are used to take out the raw materials for the finished product. Power is obtained from the electric motor through V. The belt is passed to the active traction roller for operation.

3. Slitting knife holder: The slitting knife holder of the paper slitting machine has circular knife slitting and straight knife slitting. The operating handle can make the round knife move slightly in the axial direction, and the round knife edge and cushion cover can be adjusted by the plane cam. Shear gap of the groove.

4. Waste rewinding and discharge: Use the wind of the blower to discharge the waste through the air duct.

5. Discharge mechanism and automatic rectification: The discharge mechanism is mainly composed of a discharge shaft, a supporting block, a cylinder, a base, a left and right movable seat, etc. It is composed of an automatic correction device: photoelectric opening, correction guide roller, left and right support, correction moving plate and ball . Nuts and screws, synchronous motors and left and right limit switches.

6. Paper slitting machine frame and transmission system: The paper slitting machine frame is composed of left and right wall panels, supporting blocks and unloading mechanism. The transmission system is mainly used for pulling raw materials and winding finished products. It is driven by the variable frequency stepless speed regulation motor through the motor V belt to drive the traction rubber roller. The main traction rubber roller and the driven traction rubber roller are in close contact with each other. The traction material is driven, and the lower circular cutter shaft is operated synchronously by the active traction roller to achieve better cutting requirements. The lower circular cutter shaft drives the winding A and the winding B to operate synchronously, so as to achieve the purpose of receiving materials.

paper slitting machine divides the raw material into several independent units. The working principle is to fix the raw material on the end of the discharging shaft, and install the magnetic powder tension controller to make the tension of the raw material constant, and then pass through a pair of rubber rollers. Pull the raw materials and cut them into pieces with a blade. Then, the guide roller is guided to the A and B winding reels to wind the finished product.

Shenzhen Tianheng Machinery Co., Ltd. is a professional manufacturer of Christmas craft gift machinery, madder machine, rain silk machine, pine needle machine, automatic leaf drawing machine, loosing machine, glue spreader, optical fiber peeling machine, rosin open barrel crusher and other products. Processing self-employed, the company is headquartered in Longgang District, Shenzhen, with a complete and scientific quality management system. The integrity, strength and product quality of Shenzhen Tianheng Machinery Co., Ltd. have been recognized by the industry. Welcome friends from all walks of life to visit Shenzhen Tianheng Machinery Co., Ltd. for guidance and business negotiation.